The ITM2 Dual Zone Internal Trigger - designed to work with all drum modules
The ITM2 trigger works with all mesh head setups, and with proper muting the ITM2 can successfully track regular mylar heads as well.
The ITM2 trigger module incorporates two independent variable potentiometers for sensivitivity adjustment of both the head and rim piezos. By adjusting these parameters, a unique head to rim combination can be fine-tuned to provide a perfect sensor balance to your module or interface.
In addition the sensitivity controls, a phase switch is located on the ITM2 to change the polarity of the head piezo. This type of configuration is needed for Roland drum brains and some other applications. The phase switch and pots make all A2E conversions quick and easy. Installation of the helensson ITM2 module is simple and requires only a screwdriver.
The ITM2 trigger module incorporates two independent variable potentiometers for sensivitivity adjustment of both the head and rim piezos. By adjusting these parameters, a unique head to rim combination can be fine-tuned to provide a perfect sensor balance to your module or interface.
In addition the sensitivity controls, a phase switch is located on the ITM2 to change the polarity of the head piezo. This type of configuration is needed for Roland drum brains and some other applications. The phase switch and pots make all A2E conversions quick and easy. Installation of the helensson ITM2 module is simple and requires only a screwdriver.
FEATURES:
FEATURES:
- Supports mesh as well as mylar heads - the perfect choice for A2E conversions.
- Solid steel shell with powder coat finish.
- Side-mounted design eliminates hot spots.
- Small 3 1/4" footprint - can fit very shallow shells.
- Stereo dual piezo design - head and rim sensors.
- Individual sensitivity pots and phase switch.
- Contoured body prevents possible shell damage.
- Simple one screw installation for snare, toms, and bass drums.
|
|
Here is a great little YouTube video demonstrating the ITM2 trigger. SiREN-DRUMS did a nice job of showing the unboxing, setup, and use of our triggers.
Check out the dynamics and sensitivity of his setup with the use the Helensson trigger. Note that he is using the ITM2 on all of his drums in the video! |
Only $59.95 plus 3.95 s/h
USA orders ONLY
USA orders ONLY
